How to charge the Canon camera without a charger?

How to charge the Canon camera without a charger? You’re about to go on a shoot, but your Canon camera’s battery is nearly dead. However, you lack a charger. How do you respond? Your Canon camera’s battery can be charged without a charger.

These techniques are generally applicable to Canon cameras. Some of the following techniques will be effective for your camera, depending on its age, make, and model. In fact, it’s possible that none of them will work. But lets try buy doing the following.

How to charge camera battery without charger?

To charge a Canon camera without a charger, you can use a USB cable to connect the camera to a power source such as a computer or wall adapter. However, some Canon cameras may not support charging through USB and require a specific battery charge.

Note: Your camera needs a USB port for these techniques to work. Inspect your camera before beginning one of these techniques, as certain Canon DSLR cameras don’t have these.

VIDEO Guide: If you need some extra help, Check out the video on can you charge a canon camera with a usb cord

How to charge Canon Camera without charger?

Here are three ways to charge the battery in your Canon DSLR without a charger. This may also work for the Canon Powershot battery charger.

Charging with a Wall Plug

If you don’t have a Canon battery charger, you could start charging a Canon camera battery using a wall plug.

Make sure the power cord you choose to connect is suitable for your Canon camera if your camera doesn’t have one. Depending on the model, your Canon camera may have come with a USB charging cable or a small power adapter.

If you misplaced yours, here is a replacement cable that will quickly charge most Canon cameras (3.1A). The best options are USB 3.0 to USB-C or USB 2.0 Type A to Mini B. 

To use a wall plug to charge your Canon camera battery without a charger, you must:

1. Your camera’s battery should be installed.
2. Switch off the camera. The battery might not charge when the camera is turned on, therefore this is a crucial step.
3. Your camera and USB cable should be connected. This is located inside the rubber cover that conceals the ports and connectors for your camera.
4. Your USB wall adapter and USB cable should be connected. Afterward, plug it into a wall.
5. The moment the battery is fully charged, the light will turn off.
6. Time required for charging: about 3 hours

Avoid charging the battery for longer than 24 hours since this can shorten its durability.

Charging with a Power Bank

A power bank makes it simple to recharge the battery of a Canon camera. You don’t need to have connected to a wall outlet, which is convenient. Even while trekking, you could charge your cameras in your backpack. Here is a detailed explanation of how this operates.

Are you looking for troubleshooting solutions for Canon Cameras?

Here are a couple of helpful articles: How to put a strap on a Canon camera? and How to transfer photos from a Canon camera to an iPhone?

Making sure your power bank has sufficient power to charge your camera is crucial. You must charge the battery in your camera to identify how much power is needed:

• Remove your camera’s rechargeable battery.
• Find the specifications that detail how many mAhs (milliamperes) your battery consumes. You can use this to determine the size of your power bank.
• For instance, your Canon battery might need 1,400 mAh. You can quickly charge the battery in your Canon DSLR if you get a power bank with a 30,000 mAh output. You can charge your battery up to 10 times with even a tiny power bank (such as this Anker 10,000mAh) (if you have a 1000mAh battery).

To charge your Canon camera battery using a power bank, you must:

1. Put your camera’s battery in there.
2. Switch off the camera. The battery might not charge when the camera is turned on, therefore this is a crucial step.
3. Your camera and USB cable should be connected. Remove the rubber cover that hides the cord connectors to connect your power cable to the cord connection point on your camera.
4. Plug in the power bank’s USB end to the other.
5. Your camera may include an LCD panel on the top that displays a battery icon, indicating the amount of battery that must be charged.

Look at the camera’s back; a light might be in the lower right corner. If the battery is running low, it will blink red, and when the battery is charging, it will turn solid green.

Your battery should be charged in a few hours. The green light will turn off after the battery is fully charged, and the battery sign on top of the camera will indicate this.

Examine your power demands and all the settings again if you are having difficulties getting your battery to charge.

This isn’t a good option, according to Canon’s stated statement. However, people are doing this successfully right now. Before attempting anything, be aware of your camera’s risks and specifications.

Charging with a Computer

If you cannot find a Canon camera battery charger, you can use a computer to charge your battery.

It’s vital to confirm that your camera can be charged in this manner because some cameras, including DSLRs or mirrorless cameras, will require more power. And with these kinds of cameras, this won’t work.

However, this technique might be effective if you own a Canon point-and-shoot camera. Verify again by reading the camera’s user guide.

To use a computer to charge the battery in your Canon camera, you must:

1. Your camera’s battery should be inserted.
2. Some cameras won’t charge if a memory card isn’t in place, so be sure one is.
3. Switch off the camera. The battery might not charge when the camera is turned on, therefore this is an essential part. It might only need to connect to your computer to send data.
4. Attach your camera to a USB cord. Open the rubber flap covering the camera’s cord connectors. Pair the camera’s cord connection point with the power cord that was included with the device.
5. Connect that cord to your computer’s USB port.

At the connection point, a light may turn on to indicate that it is charging. Your battery may need to be charged for three hours or so.

The moment the battery is fully charged, the light will turn off.

Canon’s official statement on this is undecided. While some of their writings advise against doing this, others do. Before attempting anything, be aware of your camera’s risks and specifications.

Why do Some Canon Cameras Require a Charger?

If you have a Canon DSLR or mirrorless camera, you might need a charger to charge your batteries.

There are several explanations for this.

• Because of how much power the batteries use, a USB connection might not be sufficient.
• The camera’s lower voltage supply could take up to eight hours to fully charge the battery.
• Not all Canon cameras are equipped with an in-camera charger or transformer.
• Your Canon camera has a built-in charger, and you might have an additional battery grip holder that attaches to the bottom of the device. Make sure you charge it exclusively with the Canon USB adaptor.
• It’s possible that your camera has no USB port for charging.

How Long Does It Take to Charge Without a Charger?

You may wonder how long it will take to charge a camera without a charger.  The gist of it is that it depends on the external power source you are utilizing.

When using its charger or hooked into a power charger through a USB connection, a fully depleted camera battery takes about 2 hours to charge at room temperature.

I’ve discovered that using a USB cable to connect it to a wall charger charges the battery more quickly than using the USB connection on your laptop. The same is true when using a USB cord connected to your laptop to charge your phone.

Although charging your camera’s battery over the USB port on your laptop takes longer, it is undoubtedly a convenient option when you don’t have a supply of electricity. I’ve done this quite a bit when traveling.

You can also use your automobile’s USB port to recharge your camera’s battery if it has one. I use the USB connector to charge my phone in my car, which always works well. However, most of the time, your automobile must be in motion for the USB port to recharge your camera’s battery.

How to Prevent Charging Problems with Batteries

Even while the aforementioned solutions work well in a pinch, carrying charged batteries in your camera bag is always preferable.

If you are experiencing trouble keeping your battery charged and are unable to use any of the solutions mentioned above, take into account the following:

• Buying extra backup batteries to switch out throughout the day
• When you take your worn-out batteries out of your camera, put them on a charge. Maintaining a good rotation requires keeping your additional batteries charged.

Recommendations for Maintaining the Batteries Health

• Lithium batteries should be charged whenever necessary, even if they still have some charge.
• When they still have some charge, keep them somewhere cool.
• Make sure your batteries are fully charged before you stop charging them.
• For charging procedures, see your camera’s instruction booklet; each Canon camera model is unique.
• Keep your batteries warm while using them outdoors in cold weather because the lower temperatures cause them to deplete more quickly.
• Keep spare batteries on hand.
• Clean up the battery contact points.

Utilizing the USB cord with the camera and connecting it to a power source will allow you to charge a Canon camera battery without a charger. But, not all of these techniques will work with all Canon cameras due to the variety of models.

Before attempting these techniques, consult the operator’s manual for your Canon camera. Moreover, just utilize charging tools that are appropriate for your camera. Using these steps, you should be able to charge your Canon camera battery without a charger.

Safety and Warnings Charging with USB Cables, Wall Plugs, and Power Banks

When charging Canon cameras with a USB cable, it’s important to ensure that the cable is compatible with the camera and has the correct specifications. For example, the cable should have the correct voltage and amperage for the camera. Generally, any USB Type-A to USB Type-C or USB Type-A to Mini-B cable should work for Canon cameras, but it’s always best to check the camera’s user manual to confirm compatibility.

When using a power bank to charge a Canon camera, it’s important to make sure that the power bank has enough power and the correct voltage output. It’s also important to consider the capacity of the power bank, which is measured in mAh (milliampere-hours). A power bank with a higher capacity will be able to charge a Canon camera more times before needing to be recharged itself.

When charging a Canon camera with a wall plug, it’s important to use a power cord that is suitable for the camera. Depending on the camera model, the camera may have come with a USB charging cable or a small power adapter. If the original cable or adapter is lost, a replacement cable with the correct specifications can be purchased. It’s important to make sure that the wall plug is compatible with the cable and camera.

In terms of safety precautions, it’s important to use only charging tools that are appropriate for the camera. Using incompatible charging tools can damage the camera or battery. It’s also important to avoid overcharging the battery, which can shorten its lifespan. It’s recommended to avoid charging the battery for longer than 24 hours.

Finally, it’s important to be aware of the risks and specifications of the camera before attempting to charge it without a charger. Some Canon cameras may not support charging

FAQs on Canon Digital Camera Charger

Video: Canon EOS Charging with USB